Cisco 3745 User Manual

Quick Start Guide
Cisco 3745 Router
INCLUDING LICENSE AND WARRANTY
1 Cisco 90-Day Limited Hardware Warranty Terms
2 Documents, Equipment, and Tools
3 Install Chassis
4 Connect Cables
5 Power Up the Router
6 Perform Initial Configuration
7 Interface Numbering
8 Where to Go Next
9 Obtaining Documentation
10 Documentation Feedback
11 Cisco Product Security Overview
12 Product Alerts and Field Notices
13 Obtaining Technical Assistance
14 Obtaining Additional Publications and Information

Cisco 3745 Specifications

General

Form Factor	Rack-mountable
Network Module Slots	4
Advanced Integration Module Slots	2
Product Type	Router
Connectivity Technology	Wired
Data Transfer Rate	100 Mbps
Data Link Protocol	Ethernet, Fast Ethernet
Encryption Algorithm	DES, 3DES, AES
Authentication Method	RADIUS, TACACS+
Operating System	Cisco IOS
Power Supply	AC 120/230 V (50/60 Hz)
Operating Temperature	32 to 104 °F (0 to 40 °C)
Storage Temperature	-4 to 149 °F (-20 to 65 °C)
Interfaces	10/100 Ethernet
RAM	256 MB
Flash Memory	128 MB (max)
Dimensions	17.5 inches
Network / Transport Protocol	TCP/IP
Remote Management Protocol	SNMP, Telnet, HTTP
Humidity	10% to 85% non-condensing
Processor	Motorola PowerPC

Summary

Cisco 90-Day Limited Hardware Warranty Terms

To Receive a Return Materials Authorization (RMA) Number

Procedure to obtain an RMA number for hardware returns.

Install Chassis

Safety Information

Crucial safety instructions and warnings for chassis installation.

Installing the Chassis

Rack-Mounting the Chassis

Grounding the Chassis

Connect Cables

Power Connections

Connecting Routers to AC Power

Connecting Routers to DC Power

DC Wiring Requirements

Wiring Procedure for DC Input

Power Up the Router

Power-Up Procedure

Perform Initial Configuration

Cisco Router and Security Device Manager (SDM)

Instructions for configuring via Cisco SDM.

Setup command facility

Steps for basic configuration using the setup utility.

Command-line interface (CLI)

Instructions for manual configuration via the command-line interface.

Initial Configuration Using Cisco Router and Security Device Manager

Initial Configuration Using the Setup Command Facility

Initial Configuration Using the CLI (Manual Configuration)

Interface Numbering

Cisco Product Security Overview

Obtaining Technical Assistance

Cisco Technical Support & Documentation Website

Submitting a Service Request