EasyManua.ls Logo

Cisco NCS 55A1-36H

Cisco NCS 55A1-36H
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Hardware Installation Guide for Cisco NCS 5500 Series Fixed-Port
Routers
First Published: 2017-09-15
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Cisco NCS 55A1-36H and is the answer not in the manual?

Cisco NCS 55A1-36H Specifications

General IconGeneral
ModelNCS 55A1-36H
Total Slots/Ports36
Operating SystemCisco IOS XR
Memory32 GB
Product FamilyNCS 5500 Series
Power SupplyAC or DC
CoolingFront-to-back airflow
Management InterfacesConsole, Ethernet, USB
Operating Temperature32°F to 104°F (0°C to 40°C)
Humidity5 to 95% non-condensing

Summary

NCS 5500 Series Fixed-Port Router Overview

NCS 5500 Series Fixed-Port Routers

Overview of the Cisco NCS 5500 series fixed-port routers and their various models.

Prepare for Installation

Review Safety Guidelines

Safety guidelines for personnel and equipment during installation procedures.

Install the Chassis

Rack-Mount the Chassis on a 4-Post Rack

Detailed steps for mounting the Cisco NCS 5500 Series chassis into a four-post rack.

Rack-Mount the Chassis on a 2-Post Rack

Steps for installing the Cisco NCS 5500 Series chassis into a two-post rack.

Ground the Chassis

Instructions and warnings for properly grounding the chassis to prevent electrical hazards.

Connect AC Power to the Chassis

Steps for connecting AC power to the chassis and related safety precautions.

Connect DC Power to the Chassis

Steps for connecting DC power to the chassis and related safety precautions.

Connect Router to the Network

Creating the Initial Router Configuration

Guide to assigning an IP address and configuring the router for network connectivity.

Replace Modules, Fan Trays, and Power Supplies

Replace NCS 55 A1-24 H, NCS 55 A1-36 H-S, NCS 5501 and NCS 5501-SE Fan Modules

Procedure to replace fan modules in specified Cisco NCS models.

Replace NCS 5502 and NCS 5502 SE Fans

Procedure to replace fan modules in Cisco NCS 5502 and NCS 5502 SE models.

Related product manuals