Cisco NCS 55A1-36H User Manual

Connect to the Console Port 34
Connect to the Management Ethernet Port 36
Creating the Initial Router Configuration 37
Installing and Removing Transceiver Modules 39
Installing and Removing SFP Modules 39
Bale Clasp SFP or SFP+ Module 40
Installing a Bale Clasp SFP or SFP+ Module 41
Removing a Bale Clasp SFP or SFP+ Module 42
Installing and Removing QSFP+/QSFP28 Transceiver Modules 44
Overview 44
Required Tools and Equipment 44
Installing the 40-Gigabit QSFP+ or 100-Gigabit Transceiver Module 45
Attaching the Optical Network Cable 46
Removing the 40-Gigabit QSFP+ or 100-Gigabit QSFP28 Transceiver Module 47
Connecting Interface Ports 48
Connecting a Fiber-Optic Port to the Network 49
Disconnecting Optical Ports from the Network 49
Maintaining Transceivers and Optical Cables 49
CHAPTER 5 Verify Chassis Installation 51
CHAPTER 6 Replace Modules, Fan Trays, and Power Supplies 53
Replace NCS 55A1-24H, NCS 55A1-36H-S, NCS 5501 and NCS 5501-SE Fan Modules 53
Replace NCS 5502 and NCS 5502 SE Fans 55
Replace Power Supply 56
APPENDIX A System Specifications 59
Environmental and Physical Specifications 59
Clearance Requirements 62
Weight, Quantity and Power Consumption 62
Airflow Direction 66
Transceivers, Connectors, and Cables 66
Transceiver and Cable Specifications 66
RJ-45 Connectors 66
Hardware Installation Guide for Cisco NCS 5500 Series Fixed-Port Routers
iv
Contents

Cisco NCS 55A1-36H Specifications

General

Brand	Cisco
Model	NCS 55A1-36H
Category	Network Router
Language	English