Need help?Do you have a question about the Cisco NCS 5501 SE and is the answer not in the manual?
General| Form Factor | 1RU |
|---|---|
| Memory | 16 GB |
| DRAM | 16 GB |
| Cooling | Front-to-back airflow |
| Input Voltage | 100-240 VAC |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Relative Humidity | 5% to 95% non-condensing |
Details essential safety precautions to avoid injury and equipment damage during installation.
Step-by-step instructions for mounting the NCS 5500 Series chassis in a 4-post rack.
Step-by-step instructions for mounting the NCS 5500 Series chassis in a 2-post rack.
Instructions for properly grounding the NCS 5500 Series chassis for electrical safety.
Steps for connecting AC power to the NCS 5500 Series chassis.
Steps for connecting DC power to the NCS 5500 Series chassis.
Instructions for establishing a console connection for initial router configuration.
Steps for assigning an IP address and configuring the router for network connectivity.
Procedures for installing and removing SFP, SFP+, QSFP+, and QSFP28 transceiver modules.
Steps for replacing AC and DC power supply units in NCS 5500 series chassis.
To Next Page