Need help?Do you have a question about the Cisco NCS 560-4 and is the answer not in the manual?
General| Model | NCS 560-4 |
|---|---|
| Cooling | Front-to-back airflow |
| Software | Cisco IOS XR |
| Operating System | Cisco IOS XR |
| Product Series | Cisco NCS 560 |
| Rack Units | 2RU |
| Total Ports | 4 |
| Port Type | QSFP28, SFP+ |
| Power Supply | AC or DC |
| Operating Temperature | 0°C to 40°C |
| Interfaces | 4 x 100G, 16 x 10G |
| Ports | 4 x 100G, 16 x 10G |
Overview of the router's key features and capabilities.
Details the physical and electrical specifications of the Cisco NCS 560-4 Router.
Explains the function and location of the fan trays for cooling the router.
Details the different interface modules supported by the router.
Information on Digital Optical Monitoring (DOM) for transceivers.
Describes the Route Switch Processor modules and their functionalities.
Details the GNSS module for timing and synchronization.
Information on the router's power supply units and their specifications.
Describes the network timing interfaces available on the router.
Explains the process of online insertion and removal of modules.
Information regarding regulatory compliance and safety standards.
Outlines essential safety precautions for installing and handling the router.
Lists general warnings and safety statements applicable to the equipment.
Specific guidelines for personal safety and protecting equipment during installation.
Critical safety information related to working with electrical components.
Guidelines for planning and ensuring adequate site power for the router.
Procedures to prevent damage from electrostatic discharge during installation.
Provides guidance for planning the router installation site.
General precautions to observe when using and working with the router.
A checklist to ensure all site planning tasks are completed.
Guidelines for selecting an appropriate site for router installation.
Specifies the environmental conditions required for optimal router operation.
Information on the physical dimensions and characteristics of the router.
Instructions for assembling the router components.
Guidelines for ensuring proper airflow for cooling.
Specific airflow guidelines for enclosed rack installations.
Considerations for the floor's capacity to support the rack and equipment.
Guidelines for connecting the router to the site power source.
Details the dedicated electrical circuit requirements for the router.
Guidelines for wiring and cabling the router at the site.
Information on connecting to the console port using asynchronous terminal.
Discusses sources of interference and how to minimize their effects.
Information on radio frequency interference.
Discusses interference from lightning and power faults.
Provides guidelines for mounting the router in a rack.
Safety precautions to follow when mounting the router in a rack.
Guidelines for selecting an appropriate equipment rack for the router.
Guidelines for selecting suitable cabinets for router installation.
Guidelines for placing the router within an equipment rack for safety and maintenance.
Specifies rack dimensions and compatibility requirements.
Describes various types of racks compatible with the router.
A checklist to verify all installation tasks have been completed.
Guidance on establishing and maintaining a site log for the router.
Instructions for inspecting and verifying the contents of the shipped router.
Safety guidelines for lifting and moving the router chassis.
Lists the necessary tools and equipment for router installation.
Procedures for unpacking and verifying the router's shipped components.
Lists the necessary preparations before installing the Cisco NCS 560-4 Router.
Step-by-step instructions for mounting the router into a rack.
Guide to assembling the air plenum for the router.
Instructions for installing the router in a vertical orientation.
Steps for attaching cable management brackets to the router.
Procedure for establishing a proper chassis ground connection.
Guide for installing the router's power supply modules.
Steps for installing the fan trays that provide cooling for the router.
Instructions for removing and replacing fan trays.
Procedure for installing the Route Switch Processor (RSP) module.
Steps for removing intermediate module (IM) center brackets.
Guide for installing interface modules into the router.
Information on removing/replacing modules while the router is operational.
Instructions for installing dust caps on unused ports.
Steps for routing and securing cables using management brackets.
Guidance on connecting the router to the network infrastructure.
Instructions for connecting console cables for management access.
How to connect to the serial port using Microsoft Windows.
How to connect to the console port using Mac OS X.
How to connect to the console port using Linux.
Installing USB device driver for Windows.
Installing USB driver for Windows 2000.
Installing USB driver for Windows XP.
Instructions for uninstalling Windows USB device driver.
Uninstalling Windows Vista USB driver.
Connecting a modem to the auxiliary port for remote access.
Details the pin configurations for various router interfaces.
Lists manufacturers of components used in the Cisco NCS 560-4 router.
To Next Page