Cisco NCS 560-4

Step 2 Secure the cable management brackets with four M4 screws. The recommended maximum torque is 10 in.-lb
(1.12 N-m).
Installing the Chassis Ground Connection
Before you connect the power or turn on the power to the Cisco NCS 560-4 Router, you must provide an
adequate chassis ground (earth) connection to your router.
This section describes how to ground the Cisco NCS 560-4 Router. The router provides two locations for
attaching a 2-hole grounding lug according to the rack-mounting brackets you use to install the router.
Cisco NCS 560-4 Router Hardware Installation Guide
63
Installing the Cisco NCS 560-4 Router
Installing the Chassis Ground Connection