Cisco NCS 560-4 - Installing the Chassis Ground Connection

Figure 25: Rack Post Flange Dimensions
Installing the Cisco NCS 560 Router Vertically
Procedure
Step 1 Install the bottom support tray at the desired height on your ANSI 19-inch rack.
Step 2 Secure the tray to the rack using the rack-mount fasteners appropriate for your rack. Use the optimal torque
prescribed for the fasteners. See the figure below.
Cisco NCS 560-4 Router Hardware Installation Guide
55
Installing the Cisco NCS 560-4 Router
Installing the Cisco NCS 560 Router Vertically