EasyManua.ls Logo

Cisco NCS 55A1-24H User Manual

Cisco NCS 55A1-24H
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hardware Installation Guide for Cisco NCS 5500 Series Fixed-Port
Routers
First Published: 2017-09-15
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Cisco NCS 55A1-24H and is the answer not in the manual?

Cisco NCS 55A1-24H Specifications

General IconGeneral
ModelNCS 55A1-24H
Form Factor1RU
Memory16 GB
Flash Memory16 GB
Product SeriesNCS 5500
Power SupplyAC or DC
CoolingFront to back
Operating Temperature0 to 40 °C
Operating SystemCisco IOS XR
Humidity5 to 95% (noncondensing)
Dimensions (H x W x D)1.72 x 17.3 x 21.5 in (4.37 x 43.94 x 54.61 cm)

Summary

NCS 5500 Series Fixed-Port Router Overview

Prepare for Installation

Review Safety Guidelines

Provides safety guidelines to avoid injury and equipment damage during installation.

Install the Chassis

Rack-Mount the Chassis on a 4-Post Rack

Provides instructions for installing the chassis into a four-post rack.

Ground the Chassis

Details the steps and warnings for grounding the chassis.

Connect AC Power to the Chassis

Instructions on connecting AC power to the chassis, including voltage ratings.

Wiring a DC Power Connector

Explains how to wire DC power connectors for the chassis.

Connect DC Power to the Chassis

Details the procedure for connecting DC power to the chassis.

Rack-Mount the Chassis on a 2-Post Rack

Provides instructions for installing the chassis into a two-post rack.

Connect Router to the Network

Connect to the Console Port

Instructions for establishing a local management connection via a console terminal.

Connect to the Management Ethernet Port

Steps to connect to the out-of-band management port for router management.

Creating the Initial Router Configuration

Guide on assigning an IP address and configuring the router for network connection.

Installing and Removing Transceiver Modules

Procedures for installing and removing SFP, SFP+, QSFP+, and QSFP28 transceiver modules.

Verify Chassis Installation

Replace Modules, Fan Trays, and Power Supplies

Replace NCS 55A1-24H, NCS 55A1-36H-S, NCS 5501 and NCS 5501-SE Fan Modules

Procedure for replacing fan modules in specific NCS 5500 series models.

Replace NCS 5502 and NCS 5502 SE Fans

Procedure for replacing fan modules in NCS 5502 and NCS 5502 SE models.

Related product manuals