Cisco 3640 Series - User Manual

Page 1
Cisco 3640 Series Router-PBX Interoperability:
VIC 2BRI-NT/TE card to Alcatel 4400 PBX with
BRI ISDN QSIG Signaling
This document describes the interoperability and configuration of a Cisco 3640 series router with a VIC
2BRI-NT/TE card to an Alcatel 4400 PBX using BRI ISDN QSIG signaling. It includes the following
sections:
• System Components
• Configuration Tasks
• Caveats
System Components
PBX Model
Alcatel 4400
PBX Release
R3.2
Telephony Signaling
BRI ISDN QSIG
Voice Gateway
Cisco 3640 series router
Gateway Release
Cisco IOS Release 12.2(1a)
VoX Protocol
H.323
Configuration Tasks
See the following sections for configuration tasks for this feature:
• Set Up
• Alcatel PBX Configuration
• Cisco 3640 Series Router Configuration

Cisco 3640 Series Specifications

General

Category	Network Router
Form Factor	Modular
Connectivity Technology	Wired
Power Device	Internal power supply
Operating System	Cisco IOS
Model	Cisco 3640 Series
Flash Memory	16 MB (expandable to 32 MB)
Data Link Protocol	Ethernet, Fast Ethernet
Network / Transport Protocol	TCP/IP, AppleTalk
Remote Management Protocol	SNMP, Telnet
Expansion Slots	4 network module slots
LAN Interfaces	Ethernet, Fast Ethernet
Power Supply	100-240 VAC, 50-60 Hz

Summary

System Components

Configuration Tasks

Set Up

Details connectivity diagrams and setup notes for system integration.

Alcatel PBX Configuration

Provides Alcatel PBX version details and sample configuration parameters.

Cisco 3640 Series Router Configuration

Details Cisco 3640 router version information and sample configuration.

Caveats