Cisco 4310 User Manual

Cisco 4310
User Manual
Table of Contents
Configure DMP IP Address and Account
Setup Cisco's DMP Admin
Setup DMP Settings
Setup Internal Storage - Read & Write
Adding your device into CommandCenterHD

Cisco 4310 Specifications

General

Brand	Cisco
Model	4310
Category	Media Player
Language	English

Summary

Configure DMP IP Address and Account

Setup Cisco's DMP Admin

Select Network

Configure network settings, including disabling dynamic IP addressing or entering static configuration data.

Setup DMP Settings

Setup Internal Storage

Add Device to CommandCenterHD

Create Device Name

Assign a unique name to the device, often based on its location or function.

Select Device Model

Choose the specific model of the DMP from the available options.

Select Firmware Version

Specify the firmware version for the digital signage player.

Set Player Status

Define the operational status of the player, typically setting it to active.

Select Zone

Assign the device to a specific zone within the management system.

Enter Device IP Address

Input the network IP address assigned to the DMP.

Enter Location Zip Code

Provide the ZIP code for the DMP's physical location.

Select Time Zone

Choose the correct time zone for the DMP's location.

Select DMP Channel

Specify the channel the DMP will use for content delivery.

Select Orientation

Configure the display orientation (e.g., horizontal or vertical) for the DMP.

Select Type to Live

Determine the content streaming type, such as 'Live'.

Select Resolution

Choose the screen resolution for the DMP display.