Cisco 5508 - Wireless Controller - Network Management Device - Page 4

© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 8
Item
Specifications
●
RFC 3580 IEEE 802.1X RADIUS Guidelines
●
RFC 3748 Extensible Authentication Protocol
●
Web-based authentication
●
TACACS support for management users
Management
●
SNMP v1, v2c, v3
●
RFC 854 Telnet
●
RFC 1155 Management Information for TCP/IP-Based Internets
●
RFC 1156 MIB
●
RFC 1157 SNMP
●
RFC 1213 SNMP MIB II
●
RFC 1350 TFTP
●
RFC 1643 Ethernet MIB
●
RFC 2030 SNTP
●
RFC 2616 HTTP
●
RFC 2665 Ethernet-Like Interface types MIB
●
RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and
Virtual Extensions
●
RFC 2819 RMON MIB
●
RFC 2863 Interfaces Group MIB
●
RFC 3164 Syslog
●
RFC 3414 User-Based Security Model (USM) for SNMPv3
●
RFC 3418 MIB for SNMP
●
RFC 3636 Definitions of Managed Objects for IEEE 802.3 MAUs
●
Cisco private MIBs
Management Interfaces
●
Web-based: HTTP/HTTPS
●
Command-line interface: Telnet, Secure Shell (SSH) Protocol, serial port
●
Cisco Wireless Control System (WCS)
Interfaces and Indicators
●
Uplink: 8 (5508) 1000BaseT, 1000Base-SX and 1000Base-LH transceiver slots
●
Small Form-Factor Pluggable (SFP) options (only Cisco SFPs supported): GLC-T, GLC-SX-MM, GLC-
LH-SM
●
LED indicators: link
●
Service Port: 10/100/1000 Mbps Ethernet (RJ45).
●
Service Port: 10/100/1000 Mbps Ethernet (RJ45) For High Availability for future use
●
LED indicators: link,
●
Utility Port: 10/100/1000 Mbps Ethernet (RJ45)
●
LED indicators: link
●
Expansion Slots: 1 (5508)
●
Console Port: RS232 (DB-9 male/RJ-45 connector included), mini-USB
●
Other Indicators: Sys, ACT, Power Supply 1, Power Supply 2
Physical and Environmental
●
Dimensions (WxDxH): 17.30 x 21.20 x 1.75 in. (440 x 539 x 44.5 mm)
●
Weight: 20 lbs (9.1 kg) with 2 power supplies
●
Temperature: Operating temperature: 32 to 104°F (0 to 40°C); Storage temperature: –13 to 158°F (–25
to 70°C)
●
Humidity: Operating humidity: 10 95%, noncondensing. Storage humidity: up to 95%
●
Input power: 100 to 240 VAC; 50/60 Hz; 1.05 A at 110 VAC, 115 W Maximum; 0.523 A at 220 VAC, 115
W Maximum; Test Conditions: Redundant Power Supplies, 40C, Full Traffic.
●
Heat Dissipation: 392 BTU/hour at 110/220 VAC Maximum
Regulatory Compliance
CE Mark
Safety:
●
UL 60950-1:2003
●
EN 60950:2000
●
EMI and susceptibility (Class A):
●
U.S.: FCC Part 15.107 and 15.109
●
Canada: ICES-003
●
Japan: VCCI
●
Europe: EN 55022, EN 55024