Cisco 860 Series Installation Guide

A-13
Cisco Integrated Services Router Hardware Installation Guide
OL-27407-02
Appendix A Technical Specifications
Cisco 860, 880, 890 Series
Table A-7 Router Specifications
Description
Design Specification
(all models except
Cisco 860VAE series)
Physical Dimensions
Dimensions with antenna and rubber
feet (H x W x D)
1.9 x 12.8 x 10.4 in.
Weight (not including desktop power
supply)
5.5 lb (2.5 kg), maximum
Environmental Operating Ranges
Nonoperating temperature –4 to 149°F (–20 to 65°C)
Nonoperating humidity 5 to 95% relative humidity
Nonoperating altitude 0 to 15,000 ft (4570 m)
Operating temperature 32 to 104°F (0 to 40°C)
Operating humidity 10 to 85% relative humidity
Operating altitude 0 to 10,000 ft (3000 m)
Acoustic
Acoustic: Sound Pressure
(Typical/Maximum) for single fan units
Low speed 31.4 dBa
High speed 44.1 dBa
Acoustic: Sound Power
(Typical/Maximum) for dual fan units
Low speed 38.9 dBA
High speed 51.7 dBa
Router Power Adapter
Input voltage 100 to 240 VAC Nominal
Input frequency 47 to 63 Hz
Power output 60 W, maximum
Output voltages +12 VDC
Inline Power-over-Ethernet Adapter
Input voltage 85 to 264 VAC
Input frequency 47 to 63 Hz
Power output 80 W, maximum
Output voltage –48 VDC

Cisco 860 Series Specifications

General

VPN Support	Yes
Firewall	Yes
QoS	Yes
Data Link Protocol	Ethernet, Fast Ethernet
Remote Management Protocol	SNMP, Telnet, HTTP, HTTPS
Operating System	Cisco IOS
Device Type	Router
WAN Interfaces	1 x 10/100Base-TX - RJ-45
LAN Interfaces	4 x 10/100Base-TX - RJ-45
Connectivity Technology	Wired
Network / Transport Protocol	IPSec, TCP/IP
Features	DHCP support, NAT support, VLAN support, IPv6 support
Compliant Standards	IEEE 802.3, IEEE 802.3u