EasyManuals Logo

Cisco 867VAE-K9 User Manual

Cisco 867VAE-K9
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1-108
Cisco Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Cisco 860, 880, 890 Series
Figure 1-67 shows the front panel of the Cisco 897VAW and the Cisco 897VAMW routers.
Figure 1-67 Front Panel of the Cisco 897VAW and the Cisco 897VAMW Routers
Figure 1-68 shows the back panel of the Cisco 897VAMW Router.
Figure 1-68 Back Panel of the Cisco 897VAMW Router
1
344770
1 LEDs
7 6 GELAN 5 4
3 2 POE 1 0
8
GE WAN
54VDC 1.2A
12VDC 2.5A
VDSL/ADSL
overPOTS
CONSOLE
RESET
344772
11
1 2 3 4 7 8 9 10
5 6
1 GE WAN interface 7 On/Off switch
2 SFP port 8 Reset button
3 USB port 9 Earth ground connection
4 8-port Gigabit Ethernet switch
1
10 Kensington security slot
5 Console/Auxiliary port 11 VDSL / ADSL over POTS
6 Power connector
1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with
the factory order, you must order and install it to enable the PoE function.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 867VAE-K9 and is the answer not in the manual?

Cisco 867VAE-K9 Specifications

General IconGeneral
Device TypeRouter
USB Ports1 x USB 2.0
DRAM256 MB
Flash Memory256 MB
Operating Temperature32 °F to 104 °F (0 °C to 40 °C)
LAN Interfaces4 x 10/100 Ethernet
Routing ProtocolsBGP, OSPF, EIGRP, RIP
Security FeaturesFirewall, VPN
Operating Humidity10% to 85% non-condensing
Power SupplyExternal power adapter
Remote Management ProtocolSNMP, Telnet, SSH, HTTP, HTTPS
FeaturesQoS, VLAN, IPv6 support
WAN InterfacesVDSL2/ADSL2+

Related product manuals