Need help?Do you have a question about the Cisco 1100-8P and is the answer not in the manual?
General| Model | Cisco 1100-8P |
|---|---|
| Uplink Ports | 2 x 1G SFP |
| Power over Ethernet (PoE) | Yes |
| Switching capacity | 16 Gbps |
| Forwarding rate | 11.9 Mpps |
| Flash Memory | 256 MB |
| Power Supply | Internal |
| Input Voltage | 100 to 240 VAC |
| Input Frequency | 50 to 60 Hz |
| MAC Address Table Size | 8000 entries |
| Jumbo Frame Support | 9 KB |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Relative Humidity | 10% to 90% (non-condensing) |
| Ports | 8 x 10/100/1000 Ethernet ports |
Provides an overview of the Cisco 1000 Series Integrated Service Routers and their suitability for businesses.
Details front and back panel views of Cisco 1100 Series ISRs, identifying interfaces, slots, and status indicators.
Essential safety instructions and warnings for installation and handling of Cisco 1000 Series Integrated Services Routers.
Precautions for electrical safety during installation, emphasizing compliance with codes and trained personnel.
Procedures for unpacking the router and verifying contents, ensuring no accidental damage.
Guidance on selecting the appropriate mounting method for the Cisco 1100 Series ISRs.
Steps to access internal components, requiring power disconnection and chassis cover removal.
Explains the ROMMON bootloader, its functions, and accessing it via a terminal connection.
Provides compliance statements for FCC Class A digital devices and RF exposure, including Canadian regulations.
To Next Page
