Need help?Do you have a question about the Cisco 891 and is the answer not in the manual?
General| Category | Network Router |
|---|---|
| USB Ports | 1 x USB 2.0 |
| Console Ports | 1 x RJ-45 |
| VPN Support | Yes |
| Device Type | Router |
| RAM | 256 MB |
| Form Factor | Desktop |
| Operating System | Cisco IOS |
| Model | 891 |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Network / Transport Protocol | IPSec |
| Remote Management Protocol | SNMP, Telnet |
| Features | Firewall protection, VPN support, VLAN support, Quality of Service (QoS), DHCP server |
| Encryption Algorithm | AES, DES, 3DES |
| Authentication Method | RADIUS, TACACS+ |
| Compliant Standards | IEEE 802.1D, IEEE 802.1Q |
| Interfaces | 1 x console - RJ-45, 1 x USB 2.0 - Type A |
| Memory | 256 MB RAM |
| Security Features | Intrusion Prevention System (IPS) |
| Dimensions | 3.28 cm x 23.11 cm x 19.56 cm |
| Power Supply | AC 120/230 V (50/60 Hz) |
Connect power cable and ensure the router power switch is on.
Connect WAN port to provider NTE and LAN ports to customer switch or devices.
Contact the GCI Provisioning Team for successful circuit and router turn-up and testing.
To Next Page
