Cisco 897VA User Manual

1-108
Cisco Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Cisco 860, 880, 890 Series
Figure 1-67 shows the front panel of the Cisco 897VAW and the Cisco 897VAMW routers.
Figure 1-67 Front Panel of the Cisco 897VAW and the Cisco 897VAMW Routers
Figure 1-68 shows the back panel of the Cisco 897VAMW Router.
Figure 1-68 Back Panel of the Cisco 897VAMW Router
1
344770
1 LEDs
7 6 GELAN 5 4
3 2 POE 1 0
8
GE WAN
54VDC 1.2A
12VDC 2.5A
VDSL/ADSL
overPOTS
CONSOLE
RESET
344772
11
1 2 3 4 7 8 9 10
5 6
1 GE WAN interface 7 On/Off switch
2 SFP port 8 Reset button
3 USB port 9 Earth ground connection
4 8-port Gigabit Ethernet switch
1
10 Kensington security slot
5 Console/Auxiliary port 11 VDSL / ADSL over POTS
6 Power connector
1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with
the factory order, you must order and install it to enable the PoE function.

Cisco 897VA Specifications

General

Model	Cisco 897VA
Category	Network Router
Device Type	Router
Enclosure Type	Desktop
Connectivity Technology	Wired
USB Ports	1 x USB 2.0
Wireless	No
Memory	256 MB
RAM	256 MB
Flash Memory	128 MB
Power Device	Internal power supply
WAN Interfaces	1 x VDSL2/ADSL2+
Security	Firewall, VPN support
Routing Protocols	BGP, OSPF, EIGRP, RIP
Remote Management Protocol	SNMP, Telnet, SSH, HTTP, HTTPS
Features	Quality of Service (QoS), VLAN support, IPv6 support
Compliant Standards	IEEE 802.3, IEEE 802.3u
Interfaces	1 x USB
Voltage Required	100-240 VAC (50/60 Hz)
Operating Temperature	32 to 104 °F (0 to 40 °C)
Operating Humidity	10 to 85% (non-condensing)

Summary

Chapter 1 Product Overview

Hardware Features

Summarizes the hardware features available for the Cisco 891 Series ISRs.

LED Descriptions for the Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs

Comprehensive guide to router LEDs and their operational meanings.

Memory

Flash Memory

Details the non-upgradable flash memory storage for various router models.

Main Memory

USB Port

Power Supply

Details power supply types, input voltages, and wattage for different router models.

Power over Ethernet Module

Explains the optional PoE module and its power delivery capabilities.

3G Cellular Data WAN Connectivity

Wireless LAN Connectivity

Feature Summary

Chapter 2 Installing the Router

Installing the Cisco 810 ISR

Comprehensive guide for installing the Cisco 810 ISR, covering various mounting options.

Installing the Cisco PoE+ Splitter

Installing the SIM Card

Installing the 3G Antenna

Mounting the Cisco 812 ISR

General guide for mounting the Cisco 812 ISR in various configurations.

Mounting the Cisco 812 ISR Below a Suspended Ceiling

Specific steps for mounting the 812 ISR under a suspended ceiling.

Mounting the Cisco 812 ISR to a Network or Electrical Box

Instructions for mounting the 812 ISR onto electrical or network boxes.

Mounting the Cisco 812 ISR on a Hard Ceiling or a Wall

Steps for mounting the 812 ISR onto solid surfaces like ceilings or walls.

Grounding the Cisco 812 ISR

Procedures for properly grounding the Cisco 812 ISR to ensure safety.

Installing the Cisco 819 ISR

Comprehensive guide for installing the Cisco 819 ISR router.

Installing the Router

General procedures for installing the Cisco 819 ISR.

Accessing the SIM Card

Installing Antennas

Installing a WiFi External Antenna

Installing a DIN Rail

Installing the Router Using the Configurable Low Profile DIN Mount

Attaching the mount to the router

Attaching the Assembled Router and Configurable DIN Mount to the DIN Rail

Installing the Power Cord Retention Lock

Installing the Power Switch Lock

Mounting the DC Power Supply

Steps for wall-mounting the DC power supply unit.

Installing the Cisco 860, 880, 890 ISR

Comprehensive guide for installing Cisco 860, 880, and 890 series routers.

Installing the Cisco 860, 880, and 890 Series Routers

Detailed installation procedures for these router series.

Warnings

Mounting on a Wall

Procedures for mounting the router on a vertical surface.

Installing the Router Ground Connection

Procedures for establishing a reliable earth ground connection for the router.

Installing the FIPS Cover