Cisco 888 G.SHDSL Router with 3G - 888 G.SHDSL Router Configuring

Configuring Radio Settings on an Access Point
How to Configure Radio Settings on an Access Point
25
Configuring Packet Fragmentation Threshold on an Access Point
Perform this task to configure the size at which packets are fragmented (sent as several pieces instead of
as one block).
Use a low setting in areas where communication is poor or where there is a great deal of radio
interference.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface dot11Radio interface
4. fragment-threshold bytes
5. end
6. copy running-config startup-config

Cisco 888 G.SHDSL Router with 3G - 888 G.SHDSL Router Specifications

General

Brand	Cisco
Model	888 G.SHDSL Router with 3G - 888 G.SHDSL Router
Category	Network Router
Language	English