AFN Atlantic SATNET on Galaxy 16
AFN7500HD Decoder Settings and Channel Guide
Current as of 20211104 2
To set up your decoder you must access the decoder settings “Satellite Setup” menu. Using the circular
navigation wheel on your AFN7500HD remote control, access the “Main Menu” and scroll to the
“Settings” menu, then select “Installation” as shown below.
Now select the “Satellite Setup” menu as shown below.
You may be prompted to enter a pin number for the Satellite Setup menu. The default pin is 0000. After
entering the pin you’ll see a warning dialog box designed to alert you that settings changes may affect the
channels you see. Please select “continue” to access the next screen.
To Next Page
Loading...
