Cisco AIR-PWRINJ-60RGD1 Series User Manual

Cisco Systems, Inc.
www.cisco.com
Cisco Aironet Series Power Injectors
AIR-PWRINJ-60RGD1= and
AIR-PWRINJ-60RGD2= Installation Instructions
This document describes the Cisco Aironet Series Access Point Power Injectors
AIR-PWRINJ-60RGD1= and AIR-PWRINJ-60RGD2= (referred to as the power injector in this
document) and provides instructions for mounting them.
The following information is provided in this document:
• Product Overview, page 2
• AIR-PWRINJ-60RGDx= Technical Specifications, page 3
• Important Safety Information, page 4
• Connectors on the Power Injector, page 6
• Unpacking the Power Injector, page 7
• Mounting the Power Injector on a Wall, page 8
• Pole Mounting the Power Injector Using AIR-PWRINJ-60-PMK=, page 9
• Connecting Data and Power to the Injector, page 11
• Power Injector Input and Output Connections, page 13

Cisco AIR-PWRINJ-60RGD1 Series Specifications

General

Model	AIR-PWRINJ-60RGD1
Power Output	60 W
Data Rate	10/100/1000 Mbps
Device Type	Power Injector
Product Type	PoE Injector
Connector Type	RJ-45

Summary

Product Overview

Technical Specifications

Important Safety Information

FCC Compliance of Class B Devices

Explains FCC compliance for Class B devices and managing potential radio interference.

General Safety Guidelines

Covers essential electrical safety, installation practices, and operating environment considerations.

Safety Precautions

Connectors on the Power Injector

Unpacking the Power Injector

Mounting the Power Injector on a Wall

Pole Mounting the Power Injector

Connecting Data and Power to the Injector

Power Injector Input and Output Connections