Contents
xxxix
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
PART
12 Configuring Applications on SSMs and SSCs
CHAPTER
53 Managing SSMs and SSCs 53-1
Information About SSMs and SSCs 53-1
Supported Applications 53-1
Information About Management Access 53-2
Sessioning to the Module 53-2
Using ASDM 53-2
Using SSH or Telnet 53-3
Other Uses for the Module Management Interface 53-3
Routing Considerations for Accessing the Management Interface 53-3
Guidelines and Limitations 53-3
Default Settings 53-4
Configuring the SSC Management Interface 53-4
Password Troubleshooting 53-6
Where to Go Next 53-7
Feature History for the SSM and SSC 53-7
CHAPTER
54 Configuring the IPS Application on the AIP SSM and SSC 54-1
Information About the AIP SSM and SSC 54-1
How the AIP SSM/SSC Works with the Adaptive Security Appliance 54-2
Operating Modes 54-2
Using Virtual Sensors (AIP SSM Only) 54-3
Differences Between the AIP SSM and the AIP SSC 54-4
Licensing Requirements for the AIP SSM/SSC 54-4
Guidelines and Limitations 54-5
Configuring the AIP SSM/SSC 54-5
AIP SSM/SSC Task Overview 54-5
Configuring the Security Policy on the AIP SSM/SSC 54-6
Assigning Virtual Sensors to a Security Context (AIP SSM Only) 54-7
Diverting Traffic to the AIP SSM/SSC 54-8
Feature History for the AIP SSM/SSC 54-9
CHAPTER
55 Configuring the Content Security and Control Application on the CSC SSM 55-1
Information About the CSC SSM 55-1
Determining What Traffic to Scan 55-3
Licensing Requirements for the CSC SSM 55-5
Prerequisites for the CSC SSM 55-5
To Next Page
Loading...
