27-27
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 27 Configuring Network Object NAT
Configuration Examples for Network Object NAT
Figure 27-47 Defining the Load Balancer Address
Step 3
Configure static NAT for the load balancer:
Figure 27-48 Configuring NAT
Step 4
For the Translated Addr field, add a new network object for the static NAT group of addresses to which
you want to translate the load balancer address by clicking the browse button .
a. Add the new network object.
Figure 27-49 Adding a New Network Object for the Static NAT Group
b.
Define the static NAT group of addresses, and click OK.
To Next Page
Loading...
