Cisco ASA 5506-X Easy Setup Guide

10
9
Click [Next].
The ASA can act as a DHCP
server and provide IP address-
es to the hosts on your inside
network.
10
Click [Use Port Address
Translation (PAT)].
Select [Use Port Address Trans-
lation (PAT)] to share a single
external IP address for devices
on the inside interface. Select
[Use Network Address Transla-
tion (NAT)] to share several ex-
ternal IP address for devices on
the inside interface.
11
Click [Next].
13
13
Enter the IP address for
the ASA FirePOWER mod-
ule.
For example, the

192.168.1.2

works with the default configu-
ration.
14
Enter the IP address of the
Default Gateway.
For example, the

192.168.1.1

works with the default configu-
ration.
15
Click [Next].
15
12
14
12
Click [Next].
You can specify the addresses
of all hosts or networks, which
are allowed to access the ASA
using HTTPS/ASDM, SSH or
Telnet.
9
11
Cisco ASA with FirePOWER Services Easy Setup Guide
3
Configuring ASA

Cisco ASA 5506-X Specifications

General

Model	ASA 5506-X
Firewall Throughput	750 Mbps
Maximum Firewall Connections	50, 000
Maximum VPN Peers	50
Integrated Ports	8 x 1 GE
Stateful Inspection Throughput	750 Mbps
Weight	4.4 lb (2 kg)
Firewall Throughput (Multiprotocol)	750 Mbps
Firewall Throughput (Application Visibility and Control AVC)	250 Mbps
Concurrent Sessions	50, 000
New Connections per Second	10, 000
IPsec VPN Throughput	100 Mbps
Interfaces	8 x 1 GE
Memory	4 GB
Flash Memory	8 GB
Form Factor	Desktop
VPN Throughput	100 Mbps
Maximum Concurrent Sessions	50, 000
New Sessions per Second	10, 000
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-13 to 158°F (-25 to 70°C)
Power Supply	External
Humidity	10% to 90% non-condensing