38
2.
Specify the type of authentication that you want to use by performing one of the following steps:
–
To use a pre-shared key for authentication (for example, “CisCo”), click the Pre-Shared Key
radio button, and enter a pre-shared key, which is shared for IPSec negotiations between both
adaptive security appliances.
Note When you configure the ASA 2 at the remote site, the VPN peer is ASA 1. Be sure to
enter the same Pre-shared Key (CisCo) that you use here.
–
To use digital certificates for authentication instead, click the Certificate radio button, and
then choose a Trustpoint Name from the drop-down menu.
3. Click Next to continue.
To Next Page
Loading...
