To Next PageTo Next Page
Need help?Do you have a question about the Cisco C9300-48S and is the answer not in the manual?
General| Model | C9300-48S |
|---|---|
| Product Series | Catalyst 9300 |
| Device Type | Switch |
| Uplink Ports | 4 x 10G SFP+ |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| Stacking | Yes, up to 8 switches |
| Management | Cisco IOS XE |
| DRAM | 4 GB |
| Flash Memory | 16 GB |
| VLANs | 4096 |
| Ports | 48 |
| Power Supply | Optional redundant power supplies |
| Operating Temperature | 0 to 40 °C |
| MAC Address Table Size | 32000 |
Presents a detailed list of Cisco Catalyst 9300 Series switch models with their specifications.
Describes the Power over Ethernet capabilities, standards, and power delivery of the switch ports.
Covers the Ethernet management port and console ports for switch access and configuration.
Presents critical safety warnings and precautions for installation to prevent injury and damage.
Outlines the necessary environmental and physical site requirements for optimal switch performance.
Addresses the impact of power variations and recommends best practices for power circuit management.
Provides detailed procedures and guidelines for ensuring proper system grounding for safety and reliability.
Offers essential safety guidelines for working with electrical equipment and preventing hazards.
Details procedures and precautions to prevent damage from Electrostatic Discharge (ESD) to components.
Describes the POST (Power-On Self-Test) and initial checks to verify switch functionality.
Outlines the planning process for configuring switches in a data stack for increased bandwidth.
Provides essential guidelines for connecting switches for both data and power stacking.
Illustrates recommended cabling configurations for setting up switch data stacks.
Details the correct procedure and guidelines for powering on switches in a stack.
Guides the user on how to plan for the configuration of a StackPower stack for power redundancy.
Provides essential guidelines for connecting switches in a StackPower configuration.
Illustrates recommended cabling configurations for setting up StackPower stacks.
Provides instructions and considerations for physically mounting the switch in a rack.
Details the procedure for attaching the necessary rack-mount brackets to the switch.
Provides instructions for connecting StackWise cables to enable switch stacking.
Provides instructions for connecting StackPower cables between switches for power management.
Provides a detailed, step-by-step guide for installing a network module into the switch.
Step-by-step instructions for installing or replacing an AC power supply module.
Provides detailed procedures and guidelines for ensuring proper system grounding for safety and reliability.
Provides essential guidelines and precautions for installing or removing fan modules.
Step-by-step instructions for installing a fan module into the switch.
Provides instructions for installing SSD modules on specific Cisco Catalyst switch models.
Details the procedure for installing SSD modules on the Cisco Catalyst 9300LM series switches.
Details the process of configuring the switch using its graphical Web User Interface.
Guides users on configuring the switch through its Command Line Interface (CLI).
