Cisco Catalyst C9300-NM-4G User Manual

Installing a Network Module
• Network Modules Overview, on page 1
• Installing a Network Module in the Switch, on page 2
• Removing a Network Module, on page 9
• Installing and Removing Cisco Transceiver Modules, on page 10
• Finding the Network Module Serial Number, on page 12
Network Modules Overview
The Cisco Catalyst 9300 Series Switches supports the following optional network modules for uplink ports.
DescriptionNetwork Module
This module has four 1G SFP module slots. Any combination of standard SFP
modules are supported.
Supported only on Cisco Catalyst 9300 Series Switches.
Note
C9300-NM-4G
This module has eight 10G SFP+ module slots.
Supported only on Cisco Catalyst 9300 Series Switches.
Note
C9300-NM-8X
This module has two 40G QSFP+ module slots.
Supported only on Cisco Catalyst 9300 Series Switches.
Note
C9300-NM-2Q
This module has four Multigigabit Ethernet (mGig) module slots.
Supported only on Cisco Catalyst 9300 Series Switches.
Note
C9300-NM-4M
This module has two 25G SFP28 module slots.
Supported only on Cisco Catalyst 9300 Series Switches.
Note
C9300-NM-2Y
This module has four 1G SFP module slots. Any combination of standard SFP
modules are supported. SFP+ modules are not supported.
If you insert an SFP+ module in the 1G network module, the SFP+ module does
not operate, and the switch logs an error message.
C3850-NM-4-1G
Installing a Network Module
1

Cisco Catalyst C9300-NM-4G Specifications

General

Product Type	Network Module
Ports	4
Compatibility	Cisco Catalyst 9300 Series Switches
Connectivity Technology	Wired
Form Factor	Plug-in Module

Summary

Network Modules Overview

Installing a Network Module in the Switch

Safety Warnings

Installation cautions and warnings for network module handling and safety.

Before You Begin

Precautions to observe before installing network modules.

Network Module Port Configurations

C9300-NM-2Q Module Port Configurations

Details on configuring ports for the C9300-NM-2Q module with 40G QSFP.

C9300-NM-4G Module Port Configurations

Details on configuring ports for the C9300-NM-4G module.

C9300-NM-4M Module Port Configurations

Details on configuring ports for the C9300-NM-4M module.

C9300-NM-2Y Module Port Configurations

Details on configuring ports for the C9300-NM-2Y module.

C9300-NM-8X Module Port Configurations

Details on configuring ports for the C9300-NM-8X module.

C3850-NM-4-1G Module Port Configurations

Details on configuring ports for the C3850-NM-4-1G module.

C3850-NM-4-10G Module Port Configurations

Details on configuring ports for the C3850-NM-4-10G module.

C3850-NM-2-10G Module Port Configurations

Details on configuring ports for the C3850-NM-2-10G module.

C3850-NM-8-10G Module Port Configurations

Details on configuring ports for the C3850-NM-8-10G module.

C3850-NM-2-40G Module Port Configurations

Details on configuring ports for the C3850-NM-2-40G module.

Removing a Network Module

Installing and Removing Cisco Transceiver Modules

Installing a Cisco Pluggable Transceiver Module

Step-by-step guide for installing Cisco pluggable transceiver modules.

Removing Cisco Pluggable Transceiver Modules

Procedure for safely removing Cisco pluggable transceiver modules.

Finding the Network Module Serial Number