Cisco Catalyst IR1821 Installation Guide

Outdoor Antennas 43
Outdoor and Transportation Antennas 43
Supported Extension Bases and Cables 44
Pluggable Interface Modules 45
CHAPTER 5
Introduction to Installing Pluggable Interface Modules 45
Installing a PIM 46
SSD Module 51
CHAPTER 6
Introduction to the Solid State Drive in the IR1800 Series 51
Installing an SSD Module 52
GNSS Field Replaceable Unit Module 55
CHAPTER 7
Overview of the GNSS FRU Module 55
GNSS Specifications 55
Installation and Removal of a GNSS FRU Module 56
Digital I/O, Ignition, and CAN Bus Connectivity 59
CHAPTER 8
Overview of the Digital I/O, Ignition, and CAN Bus Connectivity 59
Digital I/O Features 59
The Digital I/O Connector 59
Digital I/O Specifications 61
Controller Area Network Bus Features 61
Can Bus Power Connector 62
On-Board Diagnostic (OBD-II) 62
Connecting the Router 65
CHAPTER 9
Overview of the IR1800 Connecting Process 65
Preparing to Connect the Router 65
Preventing Damage to the Router 65
Connecting a PC, Server, or Workstation 66
Connecting a PC to the Console Port 66
Connecting to DC Power and CAN Bus Wiring 67
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
v
Contents

Cisco Catalyst IR1821 Specifications

General

Brand	Cisco
Model	Catalyst IR1821
Category	Network Router
Language	English