EasyManua.ls Logo

Cisco Catalyst X6148 - Page 11

Cisco Catalyst X6148
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Solution Overview
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 11 of 18
Maximum port density per chassis: These modules support up to 1152 10/100 ports
or 576 10/100/1000 ports in the Cisco Catalyst 6513 chassis; up to 768 10/100 ports or
384 10/100/1000 ports in the Cisco Catalyst 6509 chassis; up to 480 10/100 ports or 240
10/100/1000 ports in the Cisco Catalyst 6506 chassis; and up to 192 10/100 ports or 96
10/100/1000 ports in the small-form-factor Cisco Catalyst 6503 chassis.
Field-installable and -upgradable inline-power daughter cards: These modules help
enable centralized power distribution to IP phones, wireless access points, and other
devices by sharing the same Category 5 UTP cabling used for network connections.
Note: Some of these modules are designed to support field upgrades to the IEEE 802.3af PoE
standard with a new daughter card, providing maximum investment protection. Table 6 for details.
TDR: TDR is supported in all the 10/100/1000 modules and 10/100 modules (product
numbers WS-X6148A-RJ-45 and WS-X6148A-45AF); TDR tests cabling by sending
signals down the cable to identify faults in each twisted pair.
Table 5. Classic 10/100 and 10/100/1000 Modules
Product
Number
Primary
Application
Ports,
Connector,
Maximum
Distance, and
Cable Type
PoE Support Maximum
Frame Size
(jumbo
frame)
Support
Queues
per Port
(Tx=
Transmit,
Rx=
Receive)
4
Buffer
Size per
Port
WS-
X6148A-
GE-TX
Wiring closet 48, RJ-45,
100m, Category
5 cable
Field-
upgradable
to Cisco
Prestandard
and IEEE
802.3af
Up to 9216
bytes per
frame
Tx-1p3q8t
Rx-1q2t
5.5 MB
WS-6148-
GE-TX
Wiring closet 48, RJ-45,
100m, Category
5 cable
Field-
upgradable
to Cisco Pre
standard and
IEEE 802.3af
Up to 1518
bytes per
frame
Tx-1p2q2t
(per 8 ports)
Rx-1p2t (per
port)
1.4 MB
per 8
ports
WS-
X6148A-
GE-45AF
Wiring closet 48, RJ-45,
100m, Category
5 cable
Yes (both
IEEE 802.3af
and Cisco
Prestandard)
Up to 9216
bytes per
frame
Tx-1p3q8t
Rx-1q2t
5.5 MB
WS-X6148-
GE-45AF
Wiring closet 48, RJ-45,
100m, Category
5 cable
Yes (Both both
IEEE 802.3af
and Cisco
Prestandard)
Up to 1518
bytes per
frame
Tx-1p2q2t
(per 8 ports)
Rx-1p2t (per
port)
1.4 MB
per 8
ports
WS-
X6148V-
GE-TX
Wiring closet 48, RJ-45,
100m, Category
5 cable
Yes,
only Cisco
Prestandard
Up to 1518
bytes per
frame
Tx-1p2q2t
(per 8 ports)
Rx-1p2t (per
port)
1.4 MB
per 8
ports
WS-X6348-
RJ45
Wiring closet 48, RJ-45,
100m, Category
5 cable
Field-
upgradable
to only Cisco
Prestandard
and not IEEE
802.3af
Up to 8092
bytes per
frame
Tx-2q2t
Rx-1q4t
128 KB
WS-X6348-
RJ45V
Wiring closet 48, RJ-45,
100m, Category
5 cable
Yes, only
Cisco
Prestandard
Up to 8092
bytes per
frame
Tx-2q2t
Rx-1q4t
128 KB
WS-X6348-
RJ21V
Wiring closet 48, RJ-21,
100m, Category
5 cable
Yes, only
Cisco
Prestandard
Up to 8092
bytes per
frame
Tx-2q2t
Rx-1q4t
128 KB
4
Queues legend: 1p3q1t = 1 priority queue, 3 round-robin queues, and 1 threshold

Related product manuals