To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst 6880-X and is the answer not in the manual?
General| Model | Catalyst 6880-X |
|---|---|
| Product Type | Switch |
| Flash Memory | 8 GB |
| Operating System | Cisco IOS XE |
| QoS Support | Yes |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Product Series | Catalyst 6800 |
| Power Supply | AC or DC |
| Input Voltage | 100-240 VAC |
| Stacking | Not supported |
| Jumbo Frame Support | Up to 9216 bytes |
| VLAN Support | Up to 4096 VLANs |
| Security Features | ACLs, 802.1X, DHCP snooping, IP Source Guard |
| Management | CLI, SNMP |
| Dimensions (H x W x D) | 1.75 x 17.5 x 22 in (4.4 x 44.5 x 55.9 cm) |
| Storage Temperature | -40 to 158°F (-40 to 70°C) |
| Humidity | 10 to 90% (non-condensing) |
| MTBF | 200, 000 hours |
| Redundancy | Power supply, fan, and software redundancy |
Describes front panel components, ports, slots, and LEDs.
Covers general safety, electrical, ESD, grounding, and environmental site requirements.
Specifies electrical needs, connection methods, and cabling standards.
Outlines installation tasks, unpacking, and accessory kits.
Detailed steps for securely mounting the chassis in a rack.
Instructions for connecting system ground and network cables.
Step-by-step guide for installing and connecting power supplies.
Step-by-step guide for removing and installing the fan tray.
Steps to diagnose and resolve power supply and fan tray problems.
