Cisco Catalyst 6880-X User Manual

LC Connector
The LC fiber optic connector is a small form-factor fiber-optic connector that provides high-density fiber
connectivity. The LC connector can be used with either MMF cable or SMF cable. The LC connector uses a
latching clip mechanism that is similar to the one used on the RJ-45 copper connector.
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams
or view directly with optical instruments. Statement 1051
Warning
Make sure that the optical connectors are clean before making the connections. Contaminated connectors
can damage the fiber and cause data errors.
Note
Figure 58: LC Fiber-Optic Connector
Cables and Adapters
SFP Module Cables
For cabling specifications, refer to the Cisco SFP and SFP+ Transceiver Module Installation Notes.
Each port must match the wave-length specifications on the other end of the cable, and the cable must not
exceed the stipulated cable length. Copper 1000BASE-T SFP module transceivers use standard four twisted-pair,
Category 5 cable at lengths up to 328 feet (100 meters).
Catalyst 6880-X Switch Hardware Installation Guide
94 OL-30827-02
Module Connectors and Cable Specifications
LC Connector

Cisco Catalyst 6880-X Specifications

General

Brand	Cisco
Model	Catalyst 6880-X
Category	Switch
Language	English