Need help?Do you have a question about the Cisco 6509 - Catalyst Chassis Switch and is the answer not in the manual?
General| Model | 6509 |
|---|---|
| Product Series | Catalyst 6500 |
| Product Type | Chassis Switch |
| Chassis Type | Modular |
| Form Factor | Rack-mountable |
| Chassis Slots | 9 |
| Slot Capacity | 9 slots |
| Supervisor Engine Slots | 2 |
| Line Card Slots | 7 |
| Switching Capacity | Up to 720 Gbps |
| Maximum Power Supply | 6000 W |
| Max Power Supply | 6000 W |
| Management Interfaces | Console, Telnet, SNMP |
| Weight | 40 lbs |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Relative Humidity | 10% to 90% non-condensing |
| Power Supply Options | AC or DC |
| Hot-swappable Components | Power supplies |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| MTBF | 100, 000 hours |
Details the features and specifications of the Catalyst 6503 switch.
Details the features and specifications of the Catalyst 6503-E switch.
Details the features and specifications of the Catalyst 6504-E switch.
Details the features and specifications of the Catalyst 6506 switch.
Details the features and specifications of the Catalyst 6506-E switch.
Details the features and specifications of the Catalyst 6509 switch.
Details the features and specifications of the Catalyst 6509-E switch.
Details the features and specifications of the Catalyst 6509-NEB switch.
Details the features and specifications of the Catalyst 6509-NEB-A switch.
Details the features and specifications of the Catalyst 6513 switch.
General safety warnings applicable to the entire publication.
Basic environmental and physical site requirements for switch installation.
Specifies the acceptable operating and storage temperature ranges.
Details relative humidity requirements for system operation and storage.
Precautions to avoid dust and particle contamination in the system.
Guidelines to reduce EMI and RFI affecting system operation.
Details shock and vibration testing compliance for the switches.
Recommendations for protecting against power fluctuations and blackouts.
Guidelines for proper system grounding practices.
Procedures and guidelines for preventing ESD damage.
Recommendations for maintaining proper air circulation for cooling.
Guidelines and requirements for connecting power to the switch.
Guidelines and recommendations for running network and power cables.
A checklist of activities to perform before switch installation.
Checks contents of accessory kit and packing slip for all listed equipment.
Details on installing shelf bracket and crossbar assembly for rack mounting.
Instructions for attaching L brackets and cable guides to specific chassis.
Instructions for attaching L brackets and cable guides to specific chassis.
Procedures for physically installing the switch chassis into the equipment rack.
Guides on connecting the system ground for safety and performance.
Procedures for installing AC or DC power supplies into the chassis.
Steps to confirm correct installation of the switch chassis and components.
Guidance on running diagnostic tests to verify system health.
Procedures for removing and installing AC-input power supplies in Catalyst 6500 chassis.
Procedures for removing and installing DC-input power supplies for Catalyst 6500 series.
Information on configuring power supplies for redundancy and load sharing.
Procedures for cleaning fiber optic connectors to ensure proper connection quality.
Provides power and heat values for Supervisor Engines.
Guidance on isolating issues to specific subsystems like power or fan assembly.
Using LEDs to identify and diagnose startup sequence failures.
Steps to diagnose and resolve issues related to power supplies and LEDs.
Information required when contacting customer service for assistance.
To Next Page