Need help?Do you have a question about the Cisco Catalyst 6500-E Series and is the answer not in the manual?
General| Model | Catalyst 6500-E Series |
|---|---|
| Product Type | Modular Switch |
| Ports | Varies by module |
| Jumbo Frame Support | Yes, up to 9216 bytes |
| Manageable | Yes |
| Modular | Yes |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -40 to 158°F (-40 to 70°C) |
| Chassis Options | 3-slot, 6-slot, 9-slot, 13-slot |
| Supervisor Engine Options | Supervisor Engine 6T |
| Operating System | Cisco IOS |
| Power Supply | AC or DC options available |
| Redundancy | power supply and supervisor engine redundancy |
| Layer 2 Features | VLANs, STP, RSTP, MSTP |
| Layer 3 Features | RIP, OSPF, EIGRP, BGP |
| Security Features | ACLs, 802.1X, DHCP snooping |
| QoS Features | Traffic classification, policing, shaping |
| Management | SNMP, SSH, Telnet |
| Supported Modules | Various line cards for Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet |
| Relative Humidity | 10 to 90% non-condensing |
| MTBF | Varies depending on configuration |
Highlights TrustSec features like SGTs, NDAC, and MACsec for policy enforcement and data integrity.
Discusses NDAC for authenticating devices before network access to ensure security.
Explains CoPP for protecting the CPU from excessive traffic, enhancing security and performance.
Explains NSF/SSO for mitigating hardware failures via redundant supervisor takeover, ensuring continuous operation.
Details VSS for combining physical switches into a single logical element, providing high availability.
Describes Quad-Supervisor SSO for enhanced in-chassis standby supervisor availability in VSS.
To Next Page