Cisco CCNA 2

This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy
this document for noncommercial distribution and exclusive use by instructors in the CCNA 2:
Routers and Routing Basics course as part of an official Cisco Networking Academy Program.

Cisco CCNA 2 Specifications

General

Brand	Cisco
Model	CCNA 2
Category	Network Router
Language	English

Summary

Module 2: Introduction to Routers

2.1 Operating Cisco IOS Software

Introduces Cisco IOS, its role as an OS, and CLI interaction.

2.2 Starting a Router

Module 3: Configuring a Router

3.1 Configure a Router

Details router configuration steps, including naming, passwords, and interface setup.

3.2 Finishing the Configuration

Covers configuration standards, descriptions, banners, and backups.

Module 4: Learning about Other Devices

4.2 Getting Information about Remote Devices

Module 5: Managing Cisco IOS Software

5.1 Router Boot Sequence and Verification

Details the router boot process, IOS loading, and configuration register settings.

5.2 Managing the Cisco File System

Module 6: Routing and Routing Protocols

6.1 Introduction to Static Routing

Covers static route configuration, verification, and troubleshooting.

6.2 Dynamic Routing Overview

Module 7: Distance Vector Routing Protocols

7.1. Distance Vector Routing

Explains distance vector routing concepts, loops, split horizon, and route poisoning.

7.2 RIP Configuration

Module 8: TCPIP Suite Error and Control Messages

8.1 Overview of TCPIP Error Message

Module 9: Basic Router Troubleshooting

9.1 Examining the Routing Table

Explains the 'show ip route' command and determining route administrative distance.

9.2 Network Testing

9.3 Troubleshooting Router Issues Overview

Details troubleshooting using 'show interfaces', 'show cdp', and 'traceroute'.

Module 10: Intermediate TCPIP

10.1 TCP Operation

Explains TCP operation, the three-way handshake, and windowing.

10.2 Overview of Transport Layer Ports

Module 11: Access Control List (ACLs)

11.1 Access Control List Fundamentals

Standard ACLs

Extended ACLs

Details extended ACLs filtering by source/dest IP, protocols, and ports.

Placing ACLs