Cisco CGR 2010 User Manual

25
Cisco Systems, Inc. www.cisco.com
Installing and Connecting the Router
This section describes how to install and connect Cisco CGR 2010 routers to a LAN or WAN, as well as how to connect
AC or DC power to the router.
These topics are discussed.
 What you Need to Know, page 26
 Before You Begin, page 27
 Unpacking the Router, page 27
 Installing the Router in a Rack, page 27
 Power-Supply Modules, page 30
 Connecting to a Console Terminal or Modem, page 38
 Installing the Cisco Microsoft Windows USB Device Driver, page 41
 Uninstalling the Cisco Microsoft Windows USB Driver, page 42
 Connecting to the Auxiliary Port, page 43
 Connecting WAN and LAN Interfaces, page 44
 Auxiliary Port, Console Port, and Adapter Pinouts for the Cisco CGR 2010 Router, page 45
 Connectors and Cabling for the 8-Port Asynchronous/ Synchronous RS-232 GRWIC, page 51
Note: To see translations of the warnings that appear in this publication, see Cisco Connected Grid Routers Series
Regulatory Compliance and Safety Information.
Caution: For the optimum temperature ranges, do not operate it in an area that less than the minimum of 40°C and
exceeds a maximum recommended ambient temperature of 60°C.
Note: To view specifications for the CGR 2010 router, see the Cisco 2010 Connected Grid Router data sheet at:
http://www.cisco.com/en/US/prod/collateral/routers/ps10967/ps10977/data_sheet_c78_593509.html
Warning: Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning: This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Warning: Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF or
ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end
away from the unit first. Statement 1026
Warning: Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub,
in a wet basement, or near a swimming pool. Statement 1035

Cisco CGR 2010 Specifications

General

Brand	Cisco
Model	CGR 2010
Category	Network Router
Language	English

Summary

Installing and Connecting the Router

What You Need to Know

Essential information and precautions before proceeding with router installation and connection.

Before You Begin

Outlines necessary tools, equipment, and preliminary steps before installation.

Unpacking the Router

Instructions for safely unpacking the router from its shipping container.

Installing the Router in a Rack

Details on how to physically mount the Cisco CGR 2010 router into a standard rack.

Power-Supply Modules

Explains connecting AC and DC power, and available power supply modules for the router.

Connecting to a Console Terminal or Modem

Guides on establishing local administrative access via console or modem connections.

Installing the Cisco Microsoft Windows USB Device Driver

Steps to install the necessary USB driver for Windows PCs to connect to the router.

Uninstalling the Cisco Microsoft Windows USB Driver

Procedures for removing the Cisco USB device driver from a Windows PC.

Connecting to the Auxiliary Port

Instructions for connecting a modem to the auxiliary port for remote router configuration.

Connecting WAN and LAN Interfaces

Details on connecting the router to Wide Area Network (WAN) and Local Area Network (LAN) interfaces.

Auxiliary Port, Console Port, and Adapter Pinouts

Provides pinout details for auxiliary, console ports, and associated adapters.

Connectors and Cabling for RS-232 GRWIC

Information on connectors and cabling for the 8-port serial GRWIC.