42
Installing and Connecting the Router
Uninstalling the Cisco Microsoft Windows USB Driver
The EN LED for the USB console port turns green, and the Found New Hardware wizard appears.
7. Follow the Found New Hardware wizard instructions to complete the installation of the driver.
The USB console is now ready for use.
Installing the Cisco Microsoft Windows 2000 USB Driver
To install the Microsoft Windows 2000 USB driver:
1. Obtain the file Cisco_usbconsole_driver.zip from www.cisco.com and unzip it.
2. Double-click the file setup.exe.
3. The Cisco Virtual Com InstallShield Wizard begins. Click Next.
4. The Ready to Install the Program window appears. Click Install.
5. The InstallShield Wizard Completed window appears. Click Finish.
6. Connect the USB cable to the PC and router USB console ports. See Table 2 on page 39.
The EN LED for the USB console port turns green, and the Found New Hardware wizard appears.
7. Follow the Found New Hardware wizard instructions to complete the installation of the driver.
The USB console is now ready for use.
Installing the Cisco Microsoft Windows Vista USB Driver
To install the Microsoft Windows Vista USB driver:
1. Obtain the file Cisco_usbconsole_driver.zip from www.cisco.com and unzip it.
2. If using 32-bit Windows Vista, double-click the setup.exe file from the Windows_32 folder, or if using 64-bit
Windows Vista, double-click the setup(x64).exe file from the Windows_64 folder.
3. The Cisco Virtual Com InstallShield Wizard begins. Click Next.
4. The Ready to Install the Program window appears. Click Install.
Note: If a User Account Control warning appears, click “Allow - I trust this program...” to proceed.
5. The InstallShield Wizard Completed window appears. Click Finish.
6. Connect the USB cable to the PC and router USB console ports. See Table 2 on page 39.
The EN LED for the USB console port turns green, and a pop-up window is displayed stating “Installing device driver
software.”
7. Follow the instructions to complete the installation of the driver.
The USB console is ready for use.
Uninstalling the Cisco Microsoft Windows USB Driver
This section provides instructions for how to uninstall the Cisco Microsoft Windows USB device driver.
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver, page 43
To Next Page
Loading...
Need help?
General
