Cisco C891FW User Manual

1-108
Cisco Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Cisco 860, 880, 890 Series
Figure 1-67 shows the front panel of the Cisco 897VAW and the Cisco 897VAMW routers.
Figure 1-67 Front Panel of the Cisco 897VAW and the Cisco 897VAMW Routers
Figure 1-68 shows the back panel of the Cisco 897VAMW Router.
Figure 1-68 Back Panel of the Cisco 897VAMW Router
1
344770
1 LEDs
7 6 GELAN 5 4
3 2 POE 1 0
8
GE WAN
54VDC 1.2A
12VDC 2.5A
VDSL/ADSL
overPOTS
CONSOLE
RESET
344772
11
1 2 3 4 7 8 9 10
5 6
1 GE WAN interface 7 On/Off switch
2 SFP port 8 Reset button
3 USB port 9 Earth ground connection
4 8-port Gigabit Ethernet switch
1
10 Kensington security slot
5 Console/Auxiliary port 11 VDSL / ADSL over POTS
6 Power connector
1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with
the factory order, you must order and install it to enable the PoE function.

Cisco C891FW Specifications

General

Model	C891FW
Device Type	Router
Connectivity Technology	Wired, Wireless
Wireless Protocol	802.11a/b/g/n
WAN Ports Qty	1
VPN Throughput	25 Mbps
Flash Memory	256 MB
RAM	512 MB
Form Factor	Desktop
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Frequency Band	2.4 GHz, 5 GHz
WAN Ports	1 x Gigabit Ethernet
LAN Ports	4 x 10/100/1000 Ethernet
Memory	512 MB
Power Supply	AC Power Adapter
Dimensions	1.75 inches
Features	Firewall protection, VPN support, VLAN support, Quality of Service (QoS)
Operating Temperature	32 to 104 °F