Cisco C891FW

1-108
Cisco Integrated Services Router Hardware Installation Guide
Chapter 1 Product Overview
Cisco 860, 880, 890 Series
Figure 1-67 shows the front panel of the Cisco 897VAW and the Cisco 897VAMW routers.
Figure 1-67 Front Panel of the Cisco 897VAW and the Cisco 897VAMW Routers
Figure 1-68 shows the back panel of the Cisco 897VAMW Router.
Figure 1-68 Back Panel of the Cisco 897VAMW Router
1
344770
1 LEDs
7 6 GELAN 5 4
3 2 POE 1 0
8
GE WAN
54VDC 1.2A
12VDC 2.5A
VDSL/ADSL
overPOTS
CONSOLE
RESET
344772
11
1 2 3 4 7 8 9 10
5 6
1 GE WAN interface 7 On/Off switch
2 SFP port 8 Reset button
3 USB port 9 Earth ground connection
4 8-port Gigabit Ethernet switch
1
10 Kensington security slot
5 Console/Auxiliary port 11 VDSL / ADSL over POTS
6 Power connector
1. Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with
the factory order, you must order and install it to enable the PoE function.

Cisco C891FW Specifications

General

Brand	Cisco
Model	C891FW
Category	Network Router
Language	English

Summary

Cisco C897 VAB-K9

Hardware Specifications

Information about important hardware specifications for the Cisco C897VAB-K9 ISR.

Hardware Features

LEDs

Memory

Installing the Router

Installing the Cisco 810 ISR

Procedures for installing the Cisco 810 ISR.

Mounting the Cisco 812 ISR

Procedures for mounting the Cisco 812 ISR in various configurations.

Installing the Cisco 819 ISR

Procedures for installing the Cisco 819 ISR.

Installing the Cisco 860, 880, 890 ISR

Procedures for installing Cisco 860, 880, and 890 Series ISRs.