Cisco C1117-4PLTEEA User Manual

Hardware Installation Guide for the Cisco 1000 Series Integrated
Services Router
Last Modified: 2019-06-07
Last Modified: 2020-02-11
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Cisco C1117-4PLTEEA Specifications

General

Brand	Cisco
Model	C1117-4PLTEEA
Category	Network Router
Language	English

Summary

Overview of Cisco 1000 Series Integrated Services Routers

Prepare for Router Installation

Safety Recommendations

Crucial safety instructions and warnings for handling equipment.

Safety With Electricity

Guidelines for safe handling of electrical components and circuits.

Prevent Electrostatic Discharge Damage

Procedures to prevent damage from static electricity during handling.

General Site Requirements

Power Guidelines and Requirements

Information on power sources, adapters, and site power quality.

Required Tools and Equipment for Installation and Maintenance

List of tools needed for installing and maintaining the router.

Install and Connect the Router

Chassis Grounding

How to properly ground the router chassis for safety.

Connect Power Cable

Connecting the external power adapter to the router.

Connect the Router to a Console

Connect WAN and LAN Interfaces

Configure the Router at Startup

Initial configuration steps after installation and connection.

Install and Upgrade Internal Modules and Field Replaceable Units

Install an LTE Pluggable Module