EasyManua.ls Logo

Cisco C1101-4PLTEPW Series - User Manual

Cisco C1101-4PLTEPW Series
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Hardware Installation Guide for the Cisco 1000 Series Integrated
Services Router
Last Modified: 2019-06-07
Last Modified: 2020-02-11
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Cisco C1101-4PLTEPW Series and is the answer not in the manual?

Cisco C1101-4PLTEPW Series Specifications

General IconGeneral
Product SeriesC1100 Series
ModelC1101-4PLTEPW
Form FactorDesktop
WAN InterfaceGigabit Ethernet
WAN Ports Qty1
LAN Ports Qty4
USB Ports1 x USB 2.0
Power over Ethernet (PoE)Yes
MountingDesktop
Device TypeRouter
Connectivity TechnologyWireless and Wired
Data Link ProtocolEthernet
Ethernet Ports4
PoE Standard802.3af
Operating Temperature0 to 40 °C
Storage Temperature-20 °C
Humidity10 to 90% non-condensing
SecurityFirewall, VPN
Maximum Throughput1000 Mbps

Summary

Overview of Cisco 1000 Series Integrated Services Routers

Chassis Views

Details front and back panel views of C1100 Series ISRs, showing interfaces and indicators.

LED Indicators

Summarizes the LED indicators on the bezel and I/O sides of the C111x series.

Power Supply

Lists power specifications for C111x Series ISRs, including AC input and output power.

Slots and Interfaces

Explains interface notation (slot/sub-slot/port) and lists interface types like Ethernet, LTE, DSL, and WIFI.

Prepare for Router Installation

Safety With Electricity

Details precautions for working with electricity, including warnings about power lines.

Prevent Electrostatic Discharge Damage

Explains ESD risks and prevention procedures like grounding and wrist straps.

General Site Requirements

Outlines site preparation requirements for safe installation and operation, including electrical codes.

Router Environmental Requirements

Discusses optimal placement and environmental conditions for router operation, including ventilation.

Power Guidelines and Requirements

Details power site requirements and lists power supply specifications for Cisco <platform name>.

Console Port Connections

Describes EIA/TIA-232 (RJ-45) and USB console ports, noting no hardware flow control.

Install and Connect the Router

Chassis Grounding

Details how to connect the router chassis to earth ground for safety.

Connect Power Cable

Explains connecting the external AC to DC power adapter to the router.

Connect the Router to a Console

Describes connecting the router to a console terminal or PC for administrative access.

Configure the Router at Startup

Explains basic router configuration after installation, referencing the Software Configuration Guide.

Connect WAN and LAN Interfaces

Describes connecting WAN and LAN interface cables with relevant warnings.

Install and Upgrade Internal Modules and Field Replaceable Units

Related product manuals