To Next PageTo Next Page
Need help?Do you have a question about the Cisco C1121 8PLTEPW Series and is the answer not in the manual?
General| LAN Ports | 8 |
|---|---|
| LTE Support | Yes |
| Integrated Power over Ethernet (PoE) | Yes |
| Form Factor | Desktop |
| Product Type | Router |
| Connectivity Technology | Wired, Wireless |
| Frequency Band | 2.4 GHz, 5 GHz |
| Wireless Protocol | 802.11a/b/g/n/ac |
| Product Series | C1121 |
| Model | C1121-8PLTEPW |
| Device Type | Wireless router |
| Wireless LAN | Yes |
| Flash Memory | 4 GB |
| DRAM Memory | 4 GB |
| Operating System | Cisco IOS XE |
| WAN Ports | 1 |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Interfaces | 1 x WAN - RJ-45, 8 x LAN - RJ-45 |
| Features | Firewall protection, VPN support, VLAN support, Quality of Service (QoS), IPv6 support |
Illustrates front and back panel views of C1100 Series ISRs, showing interface locations.
Summarizes the LED indicators located on the bezel or chassis of the C111x series.
Presents important safety instructions and warnings before installation.
Details safety precautions related to working with electrical circuits and equipment.
Explains procedures to prevent damage from electrostatic discharge (ESD).
Outlines the site requirements for safe installation and operation of the router.
Provides guidelines for selecting an appropriate site considering environmental factors.
Specifies requirements for mounting the router in a 19-inch rack.
Details environmental conditions affecting router performance and reliability.
Lists power requirements for the router, including adapter specifications.
Describes methods for setting up the router on a desktop, rack, or wall.
Details how to mount the router using rack mounting brackets.
Provides instructions and safety warnings for mounting the router in a rack.
Details tasks for mounting the router chassis on the wall, which may vary by model.
Provides instructions for connecting the router chassis to earth ground.
Details how to connect the external AC to DC power adapter to the router.
