To Next PageTo Next Page
Need help?Do you have a question about the Cisco C1121-4PLTEP and is the answer not in the manual?
General| DSL WAN | No |
|---|---|
| Ethernet WAN | Yes |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 5 (802.11ac) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 1000 Mbit/s |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.11i, IEEE 802.11r, IEEE 802.1x |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| 3G | - |
| USB version | 3.2 Gen 1 (3.1 Gen 1) |
| Combo SFP ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 5 |
| Power over Ethernet (PoE) ports quantity | 2 |
| Security algorithms | 3DES, 802.1x RADIUS, AES, DES |
| Flash memory | 4096 MB |
| Internal memory type | DRAM |
| Product color | Silver |
| Output voltage | 12 V |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 66 W |
| Operating altitude | 0 - 3000 m |
| Storage temperature (T-T) | -20 - 65 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 85 % |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 226 mm |
|---|---|
| Width | 322 mm |
| Height | 41.9 mm |
| Weight | 1560 g |
Provides crucial safety guidelines related to electrical hazards and proper handling of equipment.
Explains the risks of ESD and outlines procedures to prevent damage to electronic components during handling.
Presents important safety instructions and warnings to ensure user safety during installation and operation.
Details the power source requirements, including voltage, frequency, and output specifications for the router's adapters.
Provides instructions on connecting the router chassis to earth ground for electrical safety and protection.
Details how to connect the external AC-to-DC power adapter to the router's power connector.
Explains how to establish a console connection for administrative access using a terminal or PC.
Guides on connecting WAN and LAN interface cables to the router for network connectivity.
Information on performing basic configuration tasks after installing and connecting the router.
Guides on installing and removing Small Form Pluggable (SFP) modules for optical Gigabit Ethernet connectivity.
General procedure for installing pluggable interface modules into the Cisco 1000 Series Integrated Services Routers.
Instructions on inserting a micro-SIM card into a USB LTE dongle, typically used with Cisco 1000 Series routers.
Instructions for installing SIM cards into the designated slots on specific Cisco 1000 Series router models.
