Cisco C1121 8PLTEPW Series User Manual

Control SourceDescriptionLED ColorPort
I/O sideOff— No link, no device
powered, PD denied
power, power delivery
fault PoE administratively
disabled.
Green Steady On— link;
if PoE device, power is
enabled.
Green Blink— TXD/RXD
data
Amber - PoE Fault
Green and Amber
Ethernet Switch GE LAN
Ports, with PoE
I/O sideGreen Steady On—
-53.5V PoE power supply
connected and all powered
port operating normally.
GreenPoE OK
Off — No -53.5V PoE
power supply connected
to router.
I/O sideOff— No linkGreen
GE WAN Ports
Steady On— link
Blink— TXD/RXD data
I/O SideOff— ShutGreen
DSL CD
Green Blink— Training,
or no shut and cable
disconnected.
Green Steady On—
Trained
I/O SideOff— No Data ActivityGreen
DSL Data
Green Blink— TX/RX
Data
I/O sideGreen On— Console
enabled.
Green
Console
I/O sideOff— No USB device
discovered.
GreenUSB Console
On— USB device
discovered.
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
17
Overview of Cisco 1000 Series Integrated Services Routers
LED Indicators

Cisco C1121 8PLTEPW Series Specifications

General

LAN Ports	8
LTE Support	Yes
Integrated Power over Ethernet (PoE)	Yes
Form Factor	Desktop
Product Type	Router
Connectivity Technology	Wired, Wireless
Frequency Band	2.4 GHz, 5 GHz
Wireless Protocol	802.11a/b/g/n/ac
Product Series	C1121
Model	C1121-8PLTEPW
Device Type	Wireless router
Wireless LAN	Yes
Flash Memory	4 GB
DRAM Memory	4 GB
Operating System	Cisco IOS XE
WAN Ports	1
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Interfaces	1 x WAN - RJ-45, 8 x LAN - RJ-45
Features	Firewall protection, VPN support, VLAN support, Quality of Service (QoS), IPv6 support