SC-105
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
OL-20382-01
Implementing Internet Key Exchange Security
Protocol on Cisco IOS XR Software
Internet Key Exchange (IKE) is a key management protocol standard that is used in conjunction with the
IP Security (IPSec) standard. IPSec is a feature that provides robust authentication and encryption of IP
packets.
IKE is a hybrid protocol that implements the Oakley key exchange and the Skeme key exchange inside
the Internet Security Association and Key Management Protocol (ISAKMP) framework. (ISAKMP,
Oakley, and Skeme are security protocols implemented by IKE.)
IPSec can be configured without IKE, but IKE enhances IPSec by providing additional features,
flexibility, and ease of configuration for the IPSec standard.
This module describes how to implement IKE on the Cisco IOS XR Software.
Note For a complete description of the IKE commands used in this chapter, see the Internet Key Exchange
Security Protocol Commands on Cisco
IOS XR Software module of the Cisco IOS XR System Security
Command Reference. To locate documentation of other commands that appear in this module, use the
command reference master index, or search online.
Feature History for Implementing Internet Key Exchange Security Protocol on Cisco CRS-1
Release Modification
Release 2.0 This feature was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 No modification.
Release 3.3.0 No modification.
Release 3.4.0 No modification.
Release 3.5.0 No modification.
Release 3.6.0 Cross references to configuration procedures that explain how to complete
some previously referenced tasks were introduced to help readers locate the
information in the current chapter or in other chapters.
Some information in the chapter was reorganized to improve readability.
Release 3.7.0 No modification.
To Next Page
Loading...
Need help?
General
