Implementing Internet Key Exchange Security Protocol on Cisco IOS XR Software
How to Implement IKE Security Protocol Configurations for IPSec Networks
SC-125
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
OL-20382-01
Importing a Public Key for RSA based User Authentication
This task imports the RSA public key to the router.
SUMMARY STEPS
1. configure
2. crypto key import authentication rsa {address address | name fqdn}
3. end
or
commit
4. show crypto key import authentication rsa {address address | name fqdn}
Step 6
quit
Example:
RP/0/RP0/CPU0:router(config-pubkey)# quit
Returns to global configuration mode.
Step 7
end
or
commit
Example:
RP/0/RP0/CPU0:router(config)# end
or
RP/0/RP0/CPU0:router(config)# commit
Saves configuration changes.
• When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting (yes/no/cancel)?
[cancel]:
–
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
–
Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
–
Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
Step 8
show crypto pubkey-chain rsa [name key-name |
address key-address]
Example:
RP/0/RP0/CPU0:router# show crypto pubkey-chain
rsa
(Optional) Displays a list of all the RSA public keys stored
on your router.
• Use the optional name or address keyword to display
details about a particular RSA public key stored on
your router.
Command or Action Purpose