Cisco CRS-1 - Carrier Routing System Router Configuration Guide

SC-153
Cisco IOS XR System Security Configuration Guide for the Cisco CRS-1 Router
OL-20382-01
Implementing Keychain Management
onCisco IOS XR Software
This module describes how to implement keychain management on Cisco IOS XR software. Keychain
management is a common method of authentication to configure shared secrets on all entities that
exchange secrets such as keys, before establishing trust with each other. Routing protocols and network
management applications on Cisco
IOS XR software often use authentication to enhance security while
communicating with peers.
Feature History for Implementing Keychain Management on the Cisco CRS-1
Contents
• Prerequisites for Configuring Keychain Management, page SC-154
• Restrictions for Implementing Keychain Management, page SC-154
• Information About Implementing Keychain Management, page SC-154
• How to Implement Keychain Management, page SC-155
• Configuration Examples for Implementing Keychain Management, page SC-167
• Additional References, page SC-167
Release Modification
Release 3.3.0 This feature was introduced on Cisco CRS-1 .
Release 3.4.0 • Support for the MAC authentication algorithm was added.
• Support for hitless key rollover and key acceptance tolerance were added.
Release 3.5.0 Support for hitless key rollover for Open Shortest Path First (OSPF) and
Intermediate System-to-Intermediate System (IS-IS) was added.
Release 3.6.0 No modification.
Release 3.7.0 No modification.
Release 3.8.0 No modification.
Release 3.9.0 No modification.

Cisco CRS-1 - Carrier Routing System Router Specifications

General

Brand	Cisco
Model	CRS-1 - Carrier Routing System Router
Category	Network Router
Language	English