Cisco DWDM-XFP Series - Page 10

10
Cisco 10-Gigabit XFP Transceiver Modules Installation Note
OL-24246-01
Overview
Table 8 Receiver Power Performance
Units Range Notes and Conditions
Long Wavelength Performances C Band, No-FEC Applications, Power-Limited
Input power range dBm –7 to –24 At BER = 1E–12
applicable at 9.9 G and 10.3 G,
30-dB OSNR (0.1-nm RBW)
Input power range dBm –7 to –22 At BER = 1E–12
(–500 to +1600 ps/nm)
applicable at 9.9 G and 10.3 G, 30-dB OSNR
(0.1-nm RBW)
Long Wavelength Performances C Band, No-FEC Applications, Noise-Limited
Input power range dBm –7 to –22 At BER = 1E–12
applicable at 9.9 G and 10.3 G,
26-dB OSNR (0.1-nm RBW)
Input power range dBm –7 to –20 At BER = 1E–12
(–500 to +1600 ps/nm)
applicable at 9.9 G and 10.3 G, 30-dB OSNR
(0.1-nm RBW)
Long Wavelength Performances C Band FEC Applications Noise-Limited
Input power range dBm –7 to –18 At BER PREFEC < 1E–5 applicable at 10.7 G and
11.1 G, 15.5-dB OSNR (0.1-nm RBW)
Input power range dBm –7 to –18 At BER PREFEC < 1E–5 (–500 to +1000 ps/nm)
applicable at 10.7 G and 11.1 G, 17-dB OSNR
(0.1-nm RBW)
Long Wavelength Performances C Band E-FEC Applications Power-Limited
Input power range dBm –7 to –27 At BER PREFEC < 7E–4 applicable at 10.7 G and
11.1 G, 26-dB OSNR (0.1-nm RBW)
Input power range dBm –7 to –26 At BER PREFEC < 7E–4 (–500 to +1300 ps/nm)
applicable at 10.7 G and 11.1 G, 26-dB OSNR
(0.1-nm RBW)
Long Wavelength Performances C Band E-FEC Applications Noise-Limited
Input power range dBm –7 to –20 At BER PREFEC < 7E–4 applicable at 10.7G and
11.1G, 12 dB OSNR (0.1-nm RBW)
Input power range dBm –7 to –20 At BER PREFEC < 7E–4 (–500 to +1300 ps/nm)
applicable at 10.7 G and 11.1 G, 14-dB OSNR
(0.1-nm RBW)