Cisco DX80 Quick Reference Guide

May 2019
Search Method
DX80
Quick
Reference
Guide
The Telehealth device is in standby if power button is flashing.
Touch anywhere on thescreen to wake system from standby.
If the system is in standby,an incoming callwill wake itautomatically.
If power button light is off, press Power Button to turn on system.
Turning On/Waking up the System
Tap the screen anywhere to get the call option to appear.
Tap the 'Call' button.
Making a Call
1. Searching the Directory
Tap the 'Directory.'
Subfolders of all RHAs and NLCHI will appear.
The first two letters of the system name denotes region.
(e.g., LG.LC.4 is in Labrador-Grenfell Health.)
Tap the subfolder of the desired system.
Scroll through the listed systems and tap the desired system.
Or type the system or contact name in the 'Search'or 'Dial' field.
Tap the name of desired system.
Ensurethe selected system is correct andtap the green 'Call'button.
2. Searching Recents
Tap 'Recents'on the call screen.
Scroll through the listed systems and tap the desired system.
Ensurethe selected system is correct andtap the green 'Call'button.
3. Searching Favourites
Tap 'Favourites'on the callscreen.
Scroll through the listed systems and tap the desired system.
Ensurethe selected system is correct andtap the green 'Call'button.
4. Dialing Directly Using Search or Dial
Tap the 'Search'or 'Dial' field.
Type a dialstring using the touchscreen keyboard.
Once the address is entered tap the 'Call'button. Ensure you
have entered the dialstring correctly before calling.
Four Ways to Place a Call

Cisco DX80 Specifications

General

Brand	Cisco
Model	DX80
Category	Conference System
Language	English