Cisco Profile Series User Manual

www.cisco.com
Cisco TelePresence Systems
Prole Series / Codec C Series / Quick Set C20 / MX200
Use with
Cisco TelePresence Touch
The next generation Cisco
TelePresence System team
collaboration solution.
The Prole, the MX200, the Quick
Set C20 and Quick Set C20 Plus,
as well as solutions based on the
Codec C Series, bring colleagues
face-to-face at the touch of a
button through a user-friendly
touch screen interface.
Easily share presentations and
multimedia to spark ideas and
generate better discussions.
TC 4.2
Quick Set C20 / C20 Plus
Codec C90
Codec C60
Codec C40
Codec C20
Prole 42”
MX200
Prole 52”
Prole 52” Dual
Prole 65” Dual
Prole 65”
1
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, MX200 User guide
D14582.07 User guide Prole Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.

Cisco Profile Series Specifications

General

Brand	Cisco
Model	Profile Series
Category	Conference System
Language	English

Summary

Getting started

Selfview and camera control

Details how to control the camera view and selfview settings.

Adding a near end camera preset

Guides on creating and saving camera positions for quick access.

Changing an existing near end camera preset

Removing an existing near end camera preset

Camera whitebalance, exposure, and backlight compensation

Placing calls

Calling someone by entering the URI

Guides on initiating calls by manually entering a Uniform Resource Identifier.

Searching and calling an entry in any of the lists

Covers searching for contacts and initiating calls from lists.

Calling an entry in one of the lists

Calling more than one

Details how to set up and initiate multi-party calls.

Using Favorites, Directory and History

In-call features

Features in a call-an overview

Calling participants to add them to an ongoing call (Multisite)

Explains how to add participants to a Multisite call.

Calling participants to add them to an ongoing call (Multiway)

Details adding participants to a Multiway conference call.

Receiving another incoming call

Features when putting someone on hold

Transferring an ongoing call

Guides on how to transfer an active call to another party.

Near end camera control

Far end camera control (in a call only)

Near end camera presets

The Settings

Gaining access to the Settings

Call Status

Camera Control & Settings

Administrator settings-Date, Time & Location

Administrator settings-Call settings

Administrator settings-IP settings for the codec

Manages IP settings (IPv4/IPv6) for the codec and network configuration.

Administrator settings-IP settings for the Touch controller

Configures IP settings (DHCP/Static) for the Touch controller.

Administrator settings-Pairing

Administrator settings-H.323 settings

Configures H.323 specific settings like alias, ID, gatekeeper, and authentication.

Administrator settings-SIP settings

Configures SIP specific settings like URI, transport layer, proxy, and discovery.

Administrator settings-Provisioning

Guides through the provisioning process for connecting to Callway or VCS.

Administrator settings-Multiway Settings

Administrator settings-Reset