Cisco Profile Series - Calling participants to add them to an ongoing call (Multiway)

www.cisco.com
... then select, in the
usual way, whom to
add to the ongoing
call.
Calling participants to add them to an ongoing call (Multiway)
While in a call you may add
participants provided that
your system permits to do
so. Tap Hold to put the
ongoing call on hold...
Once you have selected someone,
tap Start to begin including this
participant in the meeting.
The call will now be transferred to the Multiway
server and handled from there. This may take a
little while...
Tap END to disconnect yourself.
The other participants must
do the same to disconnect
themselves from the Multiway
server.
Calling more than one using Multiway is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.
When everything is
ready the Join button
will appear. Tap this and
the bottom line will change
to read Meeting. This may take a
little while.
Since the calls have been transferred
to the Multiway server you are still in
a point-to-point call, but now with the
Multiway server as the far end. This applies
to all the other participants as well.
21
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, MX200 User guide
D14582.07 User guide Prole Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.