Cisco Profile Series - Transferring an ongoing call

www.cisco.com
Transferring an ongoing call
This is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.
If applicable, tap
the participant to
be put on hold (

).
If you are in a call with just
one, that is not needed.
Then tap Hold (

)


Tap the
participant’s name
again.
Tap Transfer.
Tap
Contacts
and select whom
to transfer to in the
usual way.
If you are in a call with more than one, you
may also transfer the one on hold to the
other participant of the current call. If you do
so, you will be disconnected from the call,
but the others will stay connected.
23
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, MX200 User guide
D14582.07 User guide Prole Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.