www.cisco.com
The Camera Control & Settings pane lets you set
the whitebalance and exposure of the camera. If you
do not want to tweak this yourself, just leave it to the
system by selecting Auto.
Backlight compensation comes in handy when there
is much light behind you. Without compensation you
will easily appear very dark to the far end.
Note how the settings chosen are indicated. In the
example shown, Backlight compensation is set to O.
Camera Control & Settings
31
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, MX200 User guide
D14582.07 User guide Prole Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
To Next Page
Loading...
Need help?
General
